BB code is on. The time now is This ancient technology is great isn’t it! This is about as good as it gets and if you read it, you will most likely be able to set up what you want to: Thousands of users waiting to help! Support for accessing the Fastrak’s bios’s RAID configuration utility is built into the mboard’s bios version. Hi, Here is a copy of that thread from Clintfan.
|Date Added:||13 December 2009|
|File Size:||8.81 Mb|
|Operating Systems:||Windows NT/2000/XP/2003/2003/7/8/10 MacOS 10/X|
|Price:||Free* [*Free Regsitration Required]|
To make sure they install properly go to device managed and uninstall the old FastTrak driver, reboot and when new hardware is found point to your downloaded driver there was no need to controllfr to disc Hope this helps.
If you don’t respond to that within x 5? This is about as good as it gets and if you read it, you will most likely be able to set up what you want to: Thousands of users waiting to help!
I would backup and restore to an external drive to keep the data. Over a Month Ago Time Zone: Is the Fasttrack Bios part of the Asus Bios or is it updated by another means? Virus Problem, Please Help.
Thus conhroller bios can “see” the drives. A Pit Bull is like a gun you can pet. If you want the operating system to be on the RAID array Remove Advertisements Sponsored Links.
Don’t forget it is easiest if you use a floppy to load the driver.
Standard SATA Operation on RAID Controller? (Asus P4P800-E Deluxe)
The conclusion of the expert in the old post was that the drives were dead. I have tried re-installing the latest Asus bios using EZflash. I did it successfully a couple of years ago.
Net cannot verify the validity of the statements made on this site. Computer powers off in sleep mode If the Promise Fastrak controller is enabled in the mboard’s bios settings it probably is by defaultwhen you boot the computer you always see this first: XP Pro sp2 My System.
Creating A Floppy With Raid Driver – Asus P4PE DELUXE User Manual [Page ]
If at least one drive is detected connected to the Promise Fastrak controller and is are being detected correctly, you’ll see a line that indicates the drive s has have been detected, and if at least two drives or possibly at least one is are detected, then THAT’S when you’ll see the line that tells you what keys to press to access it’s RAID utility Ctrl-F in this case? You should have seen a hot key sequence before this or maybe after that says something to enter raid config.
The information on Computing. The issue is either you didn’t use the setup utility to assign drives or raid or there is an issue with the drives physically or electrically in it’s attachment to the raid array.
What else could I try?
Standard SATA Operation on RAID Controller? (Asus P4PE Deluxe) – Ars Technica OpenForum
Pressing Ctrl-F any way does not get you in either. Net and its accuracy. Current Temperatures Take II. This ancient technology is great isn’t it! Such opinions may not be accurate and they are to be used at your asys risk. BB code is on.
Support for accessing the Fastrak’s bios’s RAID configuration utility is built into the mboard’s bios version. All times are GMT Net is the opinions of its users. The old post was: